Merge 00706b029c6d8e0965280a6b84b6f7df675907f7 into 031938a792ac3107a512e89504929ef9e3e8ed6a

The s/\\&/&/g operation only effect is to add "amp;" after any ampersand in the artist or song name. "&" displays just fine anyways, so there's no reason to include an operation to replace it.

.config/lf/lfrc

@@ -58,7 +58,22 @@ cmd extract ${{
 	printf "%s\n\t" "$fx"
 	printf "extract?[y/N]"
 	read ans
-	[ $ans = "y" ] && aunpack $fx
+	[ $ans = "y" ] && {
+		case $fx in
+			*.tar.bz2)   tar xjf $fx     ;;
+			*.tar.gz)    tar xzf $fx     ;;
+			*.bz2)       bunzip2 $fx     ;;
+			*.rar)       unrar e $fx     ;;
+			*.gz)        gunzip $fx      ;;
+			*.tar)       tar xf $fx      ;;
+			*.tbz2)      tar xjf $fx     ;;
+			*.tgz)       tar xzf $fx     ;;
+			*.zip)       unzip $fx       ;;
+			*.Z)         uncompress $fx  ;;
+			*.7z)        7z x $fx        ;;
+			*.tar.xz)    tar xf $fx      ;;
+		esac
+	}
 }}
 
 cmd delete ${{

.config/sxiv

@@ -0,0 +1 @@
+nsxiv

.config/x11/xinitrc

@@ -13,5 +13,6 @@ if [ -f "${XDG_CONFIG_HOME:-$HOME/.config}/x11/xprofile" ]; then
 else
 	. "$HOME/.xprofile"
 fi
-
+# Activate dbus variables
+dbus-update-activation-environment --all
 ssh-agent dwm

.local/bin/displayselect

@@ -33,19 +33,36 @@ twoscreen() { # If multi-monitor is selected and there are two screens.
 
         primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
         secondary=$(echo "$screens" | grep -v "$primary")
-        direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
-        xrandr --output "$primary" --auto --scale 1.0x1.0 --output "$secondary" --"$direction"-of "$primary" --auto --scale 1.0x1.0
+        direction=$(printf "left-of\\nbelow\\nabove\\nright-of" | dmenu -i -p "What side of $primary should $secondary be on?")
+        xrandr --output "$primary" --auto --scale 1.0x1.0 --output "$secondary" --"$direction" "$primary" --auto --scale 1.0x1.0
     fi
     }
 
 morescreen() { # If multi-monitor is selected and there are more than two screens.
-	primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
-	secondary=$(echo "$screens" | grep -v "$primary" | dmenu -i -p "Select secondary display:")
-	direction=$(printf "left\\nright" | dmenu -i -p "What side of $primary should $secondary be on?")
-	tertiary=$(echo "$screens" | grep -v "$primary" | grep -v "$secondary" | dmenu -i -p "Select third display:")
-	xrandr --output "$primary" --auto --output "$secondary" --"$direction"-of "$primary" --auto --output "$tertiary" --"$(printf "left\\nright" | grep -v "$direction")"-of "$primary" --auto
+    primary=$(echo "$screens" | dmenu -i -p "Select primary display:")
+    secondary=$(echo "$screens" | grep -v "$primary" | dmenu -i -p "Select secondary display:")
+    direction=$(printf "left-of\\nbelow\\nabove\\nright-of" | dmenu -i -p "What side of $primary should $secondary be on?")
+    tertiary=$(echo "$screens" | grep -v "$primary" | grep -v "$secondary" | dmenu -i -p "Select third display:")
+    tertiary_placement=$(echo "$screens" | grep -v "$tertiary" | dmenu -i -p "Around which display should $tertiary be on?")
+    tertiary_direction=$(printf "$(whichprimary "$tertiary_placement" "$primary" "$direction")" | dmenu -i -p "What side of $tertiary_placement should $tertiary be on?")
+    xrandr --output "$primary" --auto --output "$secondary" --"$direction" "$primary" --auto --output "$tertiary" --"$tertiary_direction" "$tertiary_placement" --auto
 	}
 
+whichprimary() { # Check done in order to verify direction inconsistencies in case of choosing tertiary display around the primary one
+	if [ "$tertiary_placement" == "$primary" ]; then 
+        printf "left-of\\nbelow\\nabove\\nright-of" | grep -v $direction;
+    else
+        printf "left-of\\nbelow\\nabove\\nright-of" | grep -v "$(sideavailability "$direction")";
+	fi ;}
+
+sideavailability() { # Gives the opposite side available in case of tertiary display being around the secondary one
+	case "$(printf "left-of\\nbelow\\nabove\\nright-of" | grep -v $1)" in 
+        "left-of") printf "right-of";;
+        "below") printf "above";;
+        "above") printf "below";;
+        "right-of") printf "left-of";;
+	esac ;}
+
 multimon() { # Multi-monitor handler.
 	case "$(echo "$screens" | wc -l)" in
 		2) twoscreen ;;

.local/bin/dmenurecord

@@ -9,7 +9,7 @@
 #
 # If there is already a running instance, user will be prompted to end it.
 
-getdim() { xrandr | sed -n "s/\s*\([0-9]\+x[0-9]\+\).*\*.*/\1/p" ;}
+getdim() { xrandr | grep -oP '(?<=current ).*(?=,)' | tr -d ' ' ;}
 
 updateicon() { \
 	echo "$1" > /tmp/recordingicon

.local/bin/mounter

@@ -36,7 +36,7 @@ filter() { sed "s/ /:/g" | awk -F':' '$7==""{printf "%s%s (%s) %s\n",$1,$3,$5,$6
 unopenedluks="$(for drive in $allluks; do
 	uuid="${drive%% *}"
 	uuid="${uuid//-}"	# This is a bashism.
-	for open in $decrypted; do
+	[ -n "$decrypted" ] && for open in $decrypted; do
 		[ "$uuid" = "$open" ] && break 1
 	done && continue 1
 	echo "🔒 $drive"

.local/bin/statusbar/sb-mailbox

@@ -4,7 +4,7 @@
 # When clicked, brings up `neomutt`.
 
 case $BLOCK_BUTTON in
-	1) setsid -f "$TERMINAL" -e neomutt ;;
+	1) setsid -w -f "$TERMINAL" -e neomutt; pkill -RTMIN+12 "${STATUSBAR:-dwmblocks}" ;;
 	2) setsid -f mw -Y >/dev/null ;;
 	3) notify-send "📬 Mail module" "\- Shows unread mail
 - Shows 🔃 if syncing mail

.local/bin/statusbar/sb-music

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-filter() { sed "/^volume:/d;s/\\&/&/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d;/^ERROR/Q" | paste -sd ' ' -;}
+filter() { sed "/^volume:/d;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d;/^ERROR/Q" | paste -sd ' ' -;}
 
 pidof -x sb-mpdup >/dev/null 2>&1 || sb-mpdup >/dev/null 2>&1 &
 

.local/bin/xdg-terminal-exec

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+"$TERMINAL" -e "$@"